Zinc Alloy Nails in Anchor -ZA
Category: Fixing Solution
Zinc Alloy Nails in Anchor for a light-duty mechanical anchor is easy to install, used in Concrete, Block, Brick, and stone.
Application:
Pre-drill the hole of the same diameter as the anchor body, position fixture in place, tap the anchor into the pre-drilled hole when flush, hammer the nail into the anchor's body.
| Code | Dimensions | Material |
| ZA-01 | 6×30 | Zinc Alloy |
| Testing item | Spec | Testing results |
| DIA-D | 5.8~6.0 | 5.82~5.98 |
| Length | 28.0~30.0 | 29.2~29.8 |
| DIA-D | 3.70~3.85 | 3.72~2.82 |
| Pull Out Load | 3 kN | OK |